What is InverseAudit?
InverseAudit is a comprehensive energy auditing platform for commercial buildings. Build accurate calibrated models using monthly or interval data instantly and avoid efforts that requires in manual modeling and calibration.
Try InverseAudit now
As of Januany 10, 2024, InverseAUDIT officaly support monthly data.
Why a model should be calibrated
Energy modeling is not always accurate. Espeically, it is true for old exsitng buildings. It is important to note that the accuracy of modeling is limited not only by the inherent complexity of buildings, but also by variation in operational factors such as building schedule and occupancy, building system or equipment operating strategies, internal plug loads, and weather.1 If an energy model is not calibrated with utility data, it is not accurate. It means it should be calibrated before calculating energy cost savings.
Why should InverseAudit be used?
- It creates and calibrates a model based on your utility data and historical weather data. This leads to an accurate and representative model of your building.
- You can perform an energy audit which is equvalient to ASHRAE ennergy audit level II.
The methdologies and standards used in InverseAudit
We have incorporated with many industry standards such as
- ASHRAE Standard 90.1
- ASHRAE Standard 211
- IPMVP (International Performance Measurement and Verification Protocol)
- Our propriotery methods
More specifically, InverseAudit can be used for:
- ASHRAE Level 2 energy audit
- Building Energy Ordinance programs
- LEED-EBOM: Operations and Maintenance (O+M)