Reports and PDFs
The audit report is built from your calculations and can be downloaded as PDF, in full or by section.
Where: Energy Auditing, the report tabs and Download PDF
The report tabs
- Summary - Executive Summary and Performance Scores.
- Analysis - End-use Analysis, Monthly Costs and Usage, Retrofit Measures, Low-cost Measures, Renewable Energy (when solar PV is included) and Utility Rates.
- Recommendations - Energy Conservation Measures and, for US buildings, Carbon Impact of ECMs.
- Utility analysis - Utility Consumption, Electricity Consumption and Electricity End-use. Available after the audit is posted.
- Site visit - Only with an ASHRAE Level 1 or Level 2 report: the qualified energy auditor’s entries.
The recommendations table
On the Recommendations tab, each row is one measure, calculated on its own, so the rows don’t add up to the totals on the Summary tab.
| Column | Meaning |
|---|---|
| Electricity kWh and kW, Natural Gas therm, Fuel Oil gal, Chilled Water MBtu, Steam MBtu, Water kGal | Annual savings by energy source |
| Cost Savings (A) | Annual cost savings |
| Retrofit Costs (B) | The cost of the measure. See Costs, payback and incentives. |
| Utility Incentives (C) | Incentives found for the measure |
| Net Costs (B-C) | Shown when there are incentives |
| Payback | B ÷ A, or (B - C) ÷ A when there are incentives |
| SIR | Annual cost savings × expected life ÷ net cost. Above 1 means the measure pays for itself over its life. |
In the PDF, the Recommendations section opens with the Energy efficiency measure summary instead. Each measure has its description, energy cost savings, peak kW and energy savings, cost, incentives, life, net cost, simple ROI and payback. Low-cost and no-cost measures (net cost under $5,000) are listed before capital measures. The table ends with the totals of the measures one at a time and with all measures together, the package run. It has no SIR column. The ASHRAE reports use the same table, with the auditor’s non-energy cost savings.
Edit the report text
The analyzer can change the text of each report section. Click Edit above the text, or double-click the text, make your changes with the toolbar, then click Save (or press Ctrl+S). One text is open at a time. Cancel (or Esc) closes it without saving, and asks first if you changed it. Reset text removes the text from the report.
If the text can’t be saved, it stays open with the reason; Copy text copies it so your changes aren’t lost. While the audit is posted, the text is read-only until you unpost it.
Update keeps your edits. Run AI analysis rewrites the text of every section and replaces them.
Download a PDF
- Click Update first, so the PDF includes the latest results.
- Click Download PDF at the top of the page.
- Choose Full report, Cover page, Executive summary, Benchmarking, Analysis, Recommendations, Utility analysis, for US buildings Appendix A: ESG/carbon, Appendix B: Carbon impact of measures, or, once savings tracking has measured a year, Measured savings.
Benchmarking follows the Executive summary in the full report. It has the Benchmarking page’s results as the Benchmarking PDF prints them: the ENERGY STAR score, the operational and asset scores, the energy cost against the energy code and the end-use benchmarking, with the page’s analyses. It leaves out the building’s facts and the model fit, which the Executive summary and Appendix A give.
With an ASHRAE Level 1 or Level 2 report, the menu has Cover and compliance instead of Cover page, and also Site visit and facility, but not Benchmarking or Appendix B. Full report says how many site visit items are still open.
The file’s name starts with the report type, InverseAudit, ASHRAE Level 1 or ASHRAE Level 2, then the part and the building, for example ASHRAE Level 2 Summary_Demo Building_20261103.pdf. Measured savings keeps its own name, MeasuredSavings_.